We had them extend our driveway and pour a new pad for our outdoor kitchen. Rodney kept everything moving and answered my questions when I called. Job came out great
Brandon Landry Verified · Parish Outdoor Builders website
Patios, driveways, camper pads and structure slabs across Hammond, Ponchatoula, Amite and Independence. 3,500 PSI concrete and fiber in every pour, Same Day Proposals (for most projects) and no price change mid job. The licensed and insured concrete contractor in Tangipahoa Parish that publishes its prices up front.
Most of the concrete we pour in Tangipahoa goes with newer homes around Hammond and Ponchatoula and larger rural lots up the US 51 corridor toward Amite and Independence. That means a lot of driveway extensions, patios off the back slab, and camper, boat and shop pads on acreage. The Tangipahoa River and a web of creeks run through the parish, so low spots and drainage paths get a close look at every walkthrough before we set a grade.
The Tangipahoa Parish Permit Office, with offices in Hammond and Amite, handles unincorporated Tangipahoa, and the Town of Independence contracts with the parish for its building inspection services. Hammond and Ponchatoula each run their own building departments inside city limits. The parish office does a flood determination on each property, and lots in a special flood hazard area need Community Development approval before the permit moves forward.
Pour it once, pour it right. One firm price in writing, usually the same day we walk it.
Call 225.396.5207Length times width. A 20 by 25 foot patio is 500 sq ft. A 12 by 60 foot driveway is 720. Bigger than 3,000? Type it in.
This pour hits our $2,500 minimum, so that is what the concrete prices at. Concrete plants charge a short-load fee on small orders (roughly anything under 225 square feet). That fee is why small pours have a minimum. Tear-out, if any, is added on top.
Planning estimate, not a quote. Monthly figure assumes 7.8% fixed over 20 years through HFS Financial ($3,000 minimum loan) and is not an offer of credit. Want the exact number? Measure your own yard on satellite in two minutes, or book the free walkthrough and get it in writing.
Measure My Yard For An Exact Price Book My Free WalkthroughEvery pour is 3,500 PSI with fiber, run by one project manager from the walkthrough to the final sweep. Here is what that gets you.
Every pour is 3,500 PSI with fiber mixed in at the plant. Most bids pour 3,000 and charge extra for fiber.
For most projects, one total price in writing the same day we walk it.
No price change mid job. If we under quoted, that is on us. Only a scope change you ask for moves it.
LSLBC #063699, with over $2,500,000 in general liability and workers’ comp coverage.
On a build with this many moving parts, something will eventually go sideways. When it does, you call your project manager and it gets handled. If it is bigger than that, I come look at it myself.
“We aren’t perfect. We do make mistakes, but I promise we will fix anything and leave you satisfied when done.” — Dante Harris, Owner
Most of what we pour replaces or extends something. Every job gets the same base prep, thickness, fiber and joints.
From the walkthrough to the last sweep, one project manager runs your pour.
We come out to your Tangipahoa property, measure the pour, shoot the grade and look at where water goes today. We talk through anything else you might build on or around the slab later, so it gets poured ready for it.
For most projects, your full scope of work and one total price are in your inbox the same day as the walkthrough. That price does not change mid job — if we under quoted, that is on us, not you. The only thing that moves it is you changing the scope.
Your project manager handles the city or parish permit, any HOA architectural submittal, and the 811 locate call before anyone digs. You do not make a single one of those calls.
Topsoil stripped, base cut and compacted, forms set to grade, fiber-reinforced concrete poured and finished, control joints cut on time. Old concrete, if any, is broken out and hauled off first.
We walk the finished slab with you and clean up before we leave. Keep traffic off it while it cures and it will outlast the house.
Planning a patio? Read what goes into a concrete patio that lasts before you get bids.
Yes. Parish Outdoor Builders is a licensed and insured concrete contractor in Tangipahoa Parish (LSLBC #063699), carrying a combined $2,500,000 general liability and workers’ comp policy. One project manager runs your pour from the free walkthrough to the final walkthrough, and the proposal price is the price — no change mid job unless the scope changes.
Hammond and Ponchatoula issue permits inside their city limits. The Tangipahoa Parish Permit Office, with locations in Hammond and Amite, covers unincorporated Tangipahoa and handles inspections for the Town of Independence by contract. We check which one covers your address and pull the permit.
Yes. The parish permit office does a flood determination on every property, and lots in a special flood hazard area need Community Development approval before the permit is issued. We also keep new concrete from pushing water toward the house or a neighbor.
Every pour includes 3,500 PSI concrete, fiber, excavation, framing, the pour and expansion joints. A 20 by 25 foot patio (500 square feet) is about $4,075.
Concrete will develop hairline cracks — that is what control joints are for. Every pour gets 3,500 PSI concrete with fiber, a prepared base and expansion joints where required, and rebar can be quoted on request.
Mailing addresses do not decide your permit office — city limits do. Here is who handles concrete permits in each Tangipahoa community. We confirm your address before we submit.
| Community | Permit office | Contact |
|---|---|---|
| Hammond | City of Hammond Building Department | 219 E Robert St, Hammond, LA 70401 · (985) 277-5655 |
| Ponchatoula | City of Ponchatoula Building & Permits | 125 W Hickory Street, Ponchatoula, LA 70454 · (985) 386-6484 |
| Amite | Town of Amite City | City Hall, 212 East Oak Street · 985-748-8761 · parish permit office at 113 North Bay St. |
| Independence | Tangipahoa Parish Permit Office (by contract with the Town of Independence) | Town Hall, 583 W Railroad Ave · (985) 878-4145 |
Inside Hammond or Ponchatoula city limits, the city building department issues the permit. Unincorporated addresses, even those with a Hammond or Ponchatoula mailing address, go through the Tangipahoa Parish Permit Office.
The parish office runs a flood determination on the property. If the lot is in a special flood hazard area, Community Development has to approve it before the permit is issued.
The parish permit office keeps a separate driveway and culvert application, so a new driveway tie-in at the road is its own step.
A new or widened driveway onto US 51, US 190, LA 16, LA 22, LA 40 or LA 445 needs a single-family residential driveway permit from LA DOTD in addition to the local permit.
Every community in Tangipahoa Parish has its own permit desk, drainage quirks and kind of job. Each page below covers who issues the permit, the local rules that affect concrete and what we pour there most.
Every photo is our own work, shot on the job.
Finance the slab on its own or roll it into a bigger backyard build with one monthly payment. HFS Financial is our financing partner on every project.
Financing is provided by HFS Financial and is subject to credit approval. Rates, terms and amounts vary by applicant and can change.
Free walkthrough, no obligation. For most projects your written proposal arrives the same day.
225.396.5207Monday to Friday 8a to 5p. Saturday 9a to 1p.
“Concrete is the one thing in your yard you cannot redo cheaply, so we pour it right the first time: 3,500 PSI, fiber in every load and a project manager who answers the phone.”
Dante Harris, Chief Backyard Officer